 Type Parameters:
V
 the vertex typeE
 the edge type
 All Implemented Interfaces:
Serializable
,Graph<V,
E>
Readonly union of two graphs: G_{1} and G_{2}. If G_{1} =
(V_{1}, E_{1}) and G_{2} = (V_{2}, E_{2}) then their
union G = (V, E), where V is the union of V_{1} and V_{2}, and E is the union of
E_{1} and E_{2}. A WeightCombiner
in order to calculate edge weights.
 Author:
 Ilya Razenshteyn
 See Also:

Field Summary
Fields inherited from interface org.jgrapht.Graph
DEFAULT_EDGE_WEIGHT

Constructor Summary
ConstructorDescriptionConstruct a new graph union.AsGraphUnion
(Graph<V, E> g1, Graph<V, E> g2, WeightCombiner operator) Construct a new graph union. 
Method Summary
Modifier and TypeMethodDescriptionCreates a new edge in this graph, going from the source vertex to the target vertex, and returns the created edge.boolean
Adds the specified edge to this graph, going from the source vertex to the target vertex.Creates a new vertex in this graph and returns it.boolean
Adds the specified vertex to this graph if not already present.boolean
containsEdge
(E e) Returnstrue
if this graph contains the specified edge.boolean
containsVertex
(V v) Returnstrue
if this graph contains the specified vertex.int
Returns the degree of the specified vertex.edgeSet()
Returns a set of the edges contained in this graph.Returns a set of all edges touching the specified vertex.getAllEdges
(V sourceVertex, V targetVertex) Returns a set of all edges connecting source vertex to target vertex if such vertices exist in this graph.Returns an edge connecting source vertex to target vertex if such vertices and such edge exist in this graph.getEdgeSource
(E e) Returns the source vertex of an edge.Return the edge supplier that the graph uses whenever it needs to create new edges.getEdgeTarget
(E e) Returns the target vertex of an edge.double
getEdgeWeight
(E e) Returns the weight assigned to a given edge.getType()
Get the graph type.Return the vertex supplier that the graph uses whenever it needs to create new vertices.incomingEdgesOf
(V vertex) Returns a set of all edges incoming into the specified vertex.int
inDegreeOf
(V vertex) Returns the "in degree" of the specified vertex.int
outDegreeOf
(V vertex) Returns the "out degree" of the specified vertex.outgoingEdgesOf
(V vertex) Returns a set of all edges outgoing from the specified vertex.boolean
removeEdge
(E e) Removes the specified edge from the graph.removeEdge
(V sourceVertex, V targetVertex) Removes an edge going from source vertex to target vertex, if such vertices and such edge exist in this graph.boolean
removeVertex
(V v) Removes the specified vertex from this graph including all its touching edges if present.void
setEdgeWeight
(E e, double weight) ThrowsUnsupportedOperationException
since graph union is readonly.Returns a set of the vertices contained in this graph.Methods inherited from class org.jgrapht.graph.AbstractGraph
assertVertexExist, containsEdge, equals, hashCode, removeAllEdges, removeAllEdges, removeAllEdges, removeAllVertices, toString, toStringFromSets
Methods inherited from class java.lang.Object
clone, finalize, getClass, notify, notifyAll, wait, wait, wait
Methods inherited from interface org.jgrapht.Graph
iterables, setEdgeWeight

Constructor Details

AsGraphUnion
Construct a new graph union. Parameters:
g1
 the first graphg2
 the second graphoperator
 the weight combiner (policy for edge weight calculation)

AsGraphUnion
Construct a new graph union. The union will use theWeightCombiner.SUM
weight combiner. Parameters:
g1
 the first graphg2
 the second graph


Method Details

getAllEdges
Returns a set of all edges connecting source vertex to target vertex if such vertices exist in this graph. If any of the vertices does not exist or isnull
, returnsnull
. If both vertices exist but no edges found, returns an empty set.In undirected graphs, some of the returned edges may have their source and target vertices in the opposite order. In simple graphs the returned set is either singleton set or empty set.
 Specified by:
getAllEdges
in interfaceGraph<V,
E>  Parameters:
sourceVertex
 source vertex of the edge.targetVertex
 target vertex of the edge. Returns:
 a set of all edges connecting source vertex to target vertex.

getEdge
Returns an edge connecting source vertex to target vertex if such vertices and such edge exist in this graph. Otherwise returnsnull
. If any of the specified vertices isnull
returnsnull
In undirected graphs, the returned edge may have its source and target vertices in the opposite order.

getVertexSupplier
Return the vertex supplier that the graph uses whenever it needs to create new vertices.A graph uses the vertex supplier to create new vertex objects whenever a user calls method
Graph.addVertex()
. Users can also create the vertex in user code and then use methodGraph.addVertex(Object)
to add the vertex.In contrast with the
Supplier
interface, the vertex supplier has the additional requirement that a new and distinct result is returned every time it is invoked. More specifically for a new vertex to be added in a graphv
must not be equal to any other vertex in the graph. More formally, the graph must not contain any vertexv2
such thatv2.equals(v)
.Care must also be taken when interchanging calls to methods
Graph.addVertex(Object)
andGraph.addVertex()
. In such a case the user must make sure never to add vertices in the graph using methodGraph.addVertex(Object)
, which are going to be returned in the future by the supplied vertex supplier. Such a sequence will result into anIllegalArgumentException
when calling methodGraph.addVertex()
. Specified by:
getVertexSupplier
in interfaceGraph<V,
E>  Returns:
 the vertex supplier or
null
if the graph has no such supplier  Throws:
UnsupportedOperationException
 always, since operation is unsupported

getEdgeSupplier
Return the edge supplier that the graph uses whenever it needs to create new edges.A graph uses the edge supplier to create new edge objects whenever a user calls method
Graph.addEdge(Object, Object)
. Users can also create the edge in user code and then use methodGraph.addEdge(Object, Object, Object)
to add the edge.In contrast with the
Supplier
interface, the edge supplier has the additional requirement that a new and distinct result is returned every time it is invoked. More specifically for a new edge to be added in a graphe
must not be equal to any other edge in the graph (even if the graph allows edgemultiplicity). More formally, the graph must not contain any edgee2
such thate2.equals(e)
. Specified by:
getEdgeSupplier
in interfaceGraph<V,
E>  Returns:
 the edge supplier
null
if the graph has no such supplier  Throws:
UnsupportedOperationException
 always, since operation is unsupported

addEdge
Creates a new edge in this graph, going from the source vertex to the target vertex, and returns the created edge. Some graphs do not allow edgemultiplicity. In such cases, if the graph already contains an edge from the specified source to the specified target, then this method does not change the graph and returnsnull
.The source and target vertices must already be contained in this graph. If they are not found in graph
IllegalArgumentException
is thrown.This method creates the new edge
e
using this graph's edge supplier (seeGraph.getEdgeSupplier()
). For the new edge to be addede
must not be equal to any other edge the graph (even if the graph allows edgemultiplicity). More formally, the graph must not contain any edgee2
such thate2.equals(e)
. If suche2
is found then the newly created edgee
is abandoned, the method leaves this graph unchanged and returnsnull
.If the underlying graph implementation's
Graph.getEdgeSupplier()
returnsnull
, then this method cannot create edges and throws anUnsupportedOperationException
. Specified by:
addEdge
in interfaceGraph<V,
E>  Parameters:
sourceVertex
 source vertex of the edge.targetVertex
 target vertex of the edge. Returns:
 The newly created edge if added to the graph, otherwise
null
.  Throws:
UnsupportedOperationException
 always, since operation is unsupported See Also:

addEdge
Adds the specified edge to this graph, going from the source vertex to the target vertex. More formally, adds the specified edge,e
, to this graph if this graph contains no edgee2
such thate2.equals(e)
. If this graph already contains such an edge, the call leaves this graph unchanged and returnsfalse
. Some graphs do not allow edgemultiplicity. In such cases, if the graph already contains an edge from the specified source to the specified target, then this method does not change the graph and returnsfalse
. If the edge was added to the graph, returnstrue
.The source and target vertices must already be contained in this graph. If they are not found in graph IllegalArgumentException is thrown.
 Specified by:
addEdge
in interfaceGraph<V,
E>  Parameters:
sourceVertex
 source vertex of the edge.targetVertex
 target vertex of the edge.e
 edge to be added to this graph. Returns:
true
if this graph did not already contain the specified edge. Throws:
UnsupportedOperationException
 always, since operation is unsupported See Also:

addVertex
Creates a new vertex in this graph and returns it.This method creates the new vertex
v
using this graph's vertex supplier (seeGraph.getVertexSupplier()
). For the new vertex to be addedv
must not be equal to any other vertex in the graph. More formally, the graph must not contain any vertexv2
such thatv2.equals(v)
. If suchv2
is found then the newly created vertexv
is abandoned, the method leaves this graph unchanged and throws anIllegalArgumentException
.If the underlying graph implementation's
Graph.getVertexSupplier()
returnsnull
, then this method cannot create vertices and throws anUnsupportedOperationException
.Care must also be taken when interchanging calls to methods
Graph.addVertex(Object)
andGraph.addVertex()
. In such a case the user must make sure never to add vertices in the graph using methodGraph.addVertex(Object)
, which are going to be returned in the future by the supplied vertex supplier. Such a sequence will result into anIllegalArgumentException
when calling methodGraph.addVertex()
. Specified by:
addVertex
in interfaceGraph<V,
E>  Returns:
 The newly created vertex if added to the graph.
 Throws:
UnsupportedOperationException
 always, since operation is unsupported See Also:

addVertex
Adds the specified vertex to this graph if not already present. More formally, adds the specified vertex,v
, to this graph if this graph contains no vertexu
such thatu.equals(v)
. If this graph already contains such vertex, the call leaves this graph unchanged and returnsfalse
. In combination with the restriction on constructors, this ensures that graphs never contain duplicate vertices. Specified by:
addVertex
in interfaceGraph<V,
E>  Parameters:
v
 vertex to be added to this graph. Returns:
true
if this graph did not already contain the specified vertex. Throws:
UnsupportedOperationException
 always, since operation is unsupported

containsEdge
Returnstrue
if this graph contains the specified edge. More formally, returnstrue
if and only if this graph contains an edgee2
such thate.equals(e2)
. If the specified edge isnull
returnsfalse
. Specified by:
containsEdge
in interfaceGraph<V,
E>  Parameters:
e
 edge whose presence in this graph is to be tested. Returns:
true
if this graph contains the specified edge.

containsVertex
Returnstrue
if this graph contains the specified vertex. More formally, returnstrue
if and only if this graph contains a vertexu
such thatu.equals(v)
. If the specified vertex isnull
returnsfalse
. Specified by:
containsVertex
in interfaceGraph<V,
E>  Parameters:
v
 vertex whose presence in this graph is to be tested. Returns:
true
if this graph contains the specified vertex.

edgeSet
Returns a set of the edges contained in this graph. The set is backed by the graph, so changes to the graph are reflected in the set. If the graph is modified while an iteration over the set is in progress, the results of the iteration are undefined.The graph implementation may maintain a particular set ordering (e.g. via
LinkedHashSet
) for deterministic iteration, but this is not required. It is the responsibility of callers who rely on this behavior to only use graph implementations which support it. 
edgesOf
Returns a set of all edges touching the specified vertex. If no edges are touching the specified vertex returns an empty set. 
incomingEdgesOf
Returns a set of all edges incoming into the specified vertex.In the case of undirected graphs this method returns all edges touching the vertex, thus, some of the returned edges may have their source and target vertices in the opposite order.
 Specified by:
incomingEdgesOf
in interfaceGraph<V,
E>  Parameters:
vertex
 the vertex for which the list of incoming edges to be returned. Returns:
 a set of all edges incoming into the specified vertex.

outgoingEdgesOf
Returns a set of all edges outgoing from the specified vertex.In the case of undirected graphs this method returns all edges touching the vertex, thus, some of the returned edges may have their source and target vertices in the opposite order.
 Specified by:
outgoingEdgesOf
in interfaceGraph<V,
E>  Parameters:
vertex
 the vertex for which the list of outgoing edges to be returned. Returns:
 a set of all edges outgoing from the specified vertex.

degreeOf
Returns the degree of the specified vertex.A degree of a vertex in an undirected graph is the number of edges touching that vertex. Edges with same source and target vertices (selfloops) are counted twice.
In directed graphs this method returns the sum of the "in degree" and the "out degree".

inDegreeOf
Returns the "in degree" of the specified vertex.The "in degree" of a vertex in a directed graph is the number of inward directed edges from that vertex. See http://mathworld.wolfram.com/Indegree.html.
In the case of undirected graphs this method returns the number of edges touching the vertex. Edges with same source and target vertices (selfloops) are counted twice.
 Specified by:
inDegreeOf
in interfaceGraph<V,
E>  Parameters:
vertex
 vertex whose degree is to be calculated. Returns:
 the degree of the specified vertex.

outDegreeOf
Returns the "out degree" of the specified vertex.The "out degree" of a vertex in a directed graph is the number of outward directed edges from that vertex. See http://mathworld.wolfram.com/Outdegree.html.
In the case of undirected graphs this method returns the number of edges touching the vertex. Edges with same source and target vertices (selfloops) are counted twice.
 Specified by:
outDegreeOf
in interfaceGraph<V,
E>  Parameters:
vertex
 vertex whose degree is to be calculated. Returns:
 the degree of the specified vertex.

removeEdge
Removes an edge going from source vertex to target vertex, if such vertices and such edge exist in this graph. Returns the edge if removed ornull
otherwise. Specified by:
removeEdge
in interfaceGraph<V,
E>  Parameters:
sourceVertex
 source vertex of the edge.targetVertex
 target vertex of the edge. Returns:
 The removed edge, or
null
if no edge removed.  Throws:
UnsupportedOperationException
 always, since operation is unsupported

removeEdge
Removes the specified edge from the graph. Removes the specified edge from this graph if it is present. More formally, removes an edgee2
such thate2.equals(e)
, if the graph contains such edge. Returnstrue
if the graph contained the specified edge. (The graph will not contain the specified edge once the call returns).If the specified edge is
null
returnsfalse
. Specified by:
removeEdge
in interfaceGraph<V,
E>  Parameters:
e
 edge to be removed from this graph, if present. Returns:
true
if and only if the graph contained the specified edge. Throws:
UnsupportedOperationException
 always, since operation is unsupported

removeVertex
Removes the specified vertex from this graph including all its touching edges if present. More formally, if the graph contains a vertexu
such thatu.equals(v)
, the call removes all edges that touchu
and then removesu
itself. If no suchu
is found, the call leaves the graph unchanged. Returnstrue
if the graph contained the specified vertex. (The graph will not contain the specified vertex once the call returns).If the specified vertex is
null
returnsfalse
. Specified by:
removeVertex
in interfaceGraph<V,
E>  Parameters:
v
 vertex to be removed from this graph, if present. Returns:
true
if the graph contained the specified vertex;false
otherwise. Throws:
UnsupportedOperationException
 always, since operation is unsupported

vertexSet
Returns a set of the vertices contained in this graph. The set is backed by the graph, so changes to the graph are reflected in the set. If the graph is modified while an iteration over the set is in progress, the results of the iteration are undefined.The graph implementation may maintain a particular set ordering (e.g. via
LinkedHashSet
) for deterministic iteration, but this is not required. It is the responsibility of callers who rely on this behavior to only use graph implementations which support it. 
getEdgeSource
Returns the source vertex of an edge. For an undirected graph, source and target are distinguishable designations (but without any mathematical meaning). Specified by:
getEdgeSource
in interfaceGraph<V,
E>  Parameters:
e
 edge of interest Returns:
 source vertex

getEdgeTarget
Returns the target vertex of an edge. For an undirected graph, source and target are distinguishable designations (but without any mathematical meaning). Specified by:
getEdgeTarget
in interfaceGraph<V,
E>  Parameters:
e
 edge of interest Returns:
 target vertex

getEdgeWeight
Returns the weight assigned to a given edge. Unweighted graphs return 1.0 (as defined byGraph.DEFAULT_EDGE_WEIGHT
), allowing weightedgraph algorithms to apply to them when meaningful. Specified by:
getEdgeWeight
in interfaceGraph<V,
E>  Parameters:
e
 edge of interest Returns:
 edge weight

getType
Get the graph type. The graph type can be used to query for additional metadata such as whether the graph supports directed or undirected edges, selfloops, multiple (parallel) edges, weights, etc. 
setEdgeWeight
ThrowsUnsupportedOperationException
since graph union is readonly. Specified by:
setEdgeWeight
in interfaceGraph<V,
E>  Parameters:
e
 edge on which to set weightweight
 new weight for edge
